High Pressure Auto Prime 6GSHAP

High Pressure Auto Prime 6GSHAP
Item# 6GSHAP

Product Description

The model 6GSHAP is capable of achieving maximum flows of 2100 gpm (477 m3/h) and maximum total head of 375' (114 m), with solids handling up to 7/8" (22 mm) in diameter. The standard 6GSHAP is powered by a water-cooled, 6-cylinder diesel engine. Alternative drives are available, including other diesel engines or electric motor options.


heavy duty pumps are engineered specifically for portable application Fully automatic priming system allows the pump to prime and re-prime while running Compressor-fed, venturi priming system provides rapid, reliable priming Fully guarded coupling Mechanical seal with biodegradable glycol quench allows the pump to start and run dry Non-return valve uses only a single moving part to allow full flow with minimal restriction Pump casings are hydrostatically tested to 50 psig (345 kPa) above the peak casing design pressure Standard engine control panel provides preset emergency shutdown protection and allows the addition of automatic level control Highway trailer with integral fuel cell/chassis, lights, fenders, tie downs, lifting bail, front and rear jacks, and electric brakes on one axle


Pumps Environmental Box captures venturi blow by, separates and silences air exhaust and returns liquid to the pump suction. Fuel tanks for extended run times and/or remote location as required Skid-mounted formats with tie downs, lifting bail and fork pockets Trailer brakes can be offered as required Sound attenuated enclosure options Hose racks, accessory containers and other custom features available as required Wide range of suction and discharge fittings including QD Quick Disconnect fittings and accessories


Connections: 6"x 4" (150 mm x 100 mm) ANSI Flanges Maximum Pump Speed: 2100 rpm Maximum Flow: 2100 gpm (477 m3/h) Maximum Head: 375' (114 m) Maximum Static Priming Lift: 28' (8.5 m) Water Temperature Limit: 160 F (70 C) Solids Handling Capability: 7/8" (22 mm) Maximum Casing Pressure: 200 psig (1379 kPa) Standard Compact Fuel Tank: 130 gallons (492 liters) Optional Large Fuel Tank: 190 gallons (719 liters)


Casing: Cast Steel (CD4MCu is an option) Impeller: CD4MCu Bearing Housing: Cast Iron Bearing Lubrication: Grease Shaft: Steel Shaft Sleeve: Stainless Steel Seal: Silicon Carbide on Silicon Carbide Chassis/Fuel Cell: Steel Non-Return Valve: Nitrile Fitted Cast Iron Environmental Box (Optional): Steel

Please Contact Nutmeg Utility Products, Inc For Pricing:

Phone #203-272-2291

Fax #203 272-1830

Toll-Free #800-424-4246

Email- Info@nutmegutility.com