The model 6GSRWP is capable of achieving maximum flows of 800 gpm (182 m3/h) and maximum discharge pressures up to 25 psig while handling water, air, and solids up to 2-1/2" (63 mm) in diameter.
The standard 6GSRWP is powered by a water-cooled, 4-cylinder diesel engine with reduction gearbox. Alternative drives are available, including other diesel engines or electric motor options.
Pump’s proven Rotary Lobe pump with pulsation-free convoluted, 4-lobe rotors in a between-bearings configuration Replaceable wearplates for both front and rear covers for extended cover life Silicon Carbide mechanical seals requiring no barrier fluid Direct drive through a flexible coupling and engine-mounted reduction gearbox Large suction and discharge header tanks for easy priming, draining and solids settlingPump casing fitted with temperature gauge and high pump temperature engine shutdown Recirculation line between header tanks to ensure rotors are always wetted Pump casings are hydrostatically tested to 50 psig (345 kPa) above the peak casing design pressure Standard engine control panel provides preset
emergency shutdown protection and allows the addition of automatic level control Standard skid-mounted format with integral fuel tank, tie downs, lifting bail and fork pockets
Fuel tanks for extended run times and/or remote location as required Highway trailer with integral fuel cell/chassis, lights, fenders, tie downs, lifting bail, front and rear jacks Trailer brakes can be offered as requiredSound attenuated enclosure options Hose racks, accessory containers and other
custom features available as required Wide range of suction and discharge fittings
including “QD” Quick Disconnect fittings and accessories
Connections: 6" (150 mm) ANSI Flanges Maximum Pump Speed: 600 rpm (300-500 rpm normal operating range) Maximum Engine Speed: 2040 rpm (1020-1700 rpm normal operating range) Maximum Flow: 800 gpm (182 m3/h) (107 cfm) of water or air at 600 rpm pump/2040 rpm engine Water Temperature Limit: 140° F (60° C) Solids Handling Capability: 1-1/2" (38 mm) Maximum Casing Pressure: 75 psig (517 kPa) Standard Compact Fuel Tank: 52 gallons (197 liters)
Casing: Aluminum Rotors: NBR with cast iron core Bearing Housings: Aluminum Bearing Covers: Aluminum Wearplates: Stainless Steel Timing Gears: Case Hardened Steel Shafts: Steel Shaft Sleeves: Stainless Steel Seal: Silicon Carbide on Silicon Carbide Header Tanks: Steel Fuel Cell/Chassis: Steel
Please Contact Nutmeg Utility Products, Inc For Pricing:
Fax #203 272-1830