Trash Auto Prime 18GSTAP

Trash Auto Prime 18GSTAP
Item# 18GSTAP

Product Description

The model 18GSTAP is capable of achieving maximum flows of 12500 gpm (2840 m3/h) and maximum total head of 138' (42 m) while handling solids up to 4" (100 mm) in diameter. The standard 18GSTAP is powered by a water-cooled, 6-cylinder diesel engine. Alternative drives are available, including other diesel engines or electric motor options.

FEATURES:

heavy duty pumps are engineered specifically for portable application Fully automatic priming system allows the pump to prime and re-prime while running Compressor-fed, venturi priming system provides rapid, reliable priming Fully guarded coupling Mechanical seal with biodegradable glycol quench allows the pump to start and run dry Non-return valve uses only a single moving part to allow full flow with minimal restriction Pump casings are hydrostatically tested to 50 psig (345 kPa) above the peak casing design pressure Standard engine control panel provides preset emergency shutdown protection and allows the addition of automatic level control Skid-mounted format with integral fuel tank, tie downs, lifting bail and fork pockets

OPTIONS:

Pumps Environmental Box captures venturi blow by, separates and silences air exhaust and returns liquid to the pump suction. Fuel tanks for extended run times and/or remote location as required Highway trailer with integral fuel cell/chassis, lights, fenders, tie downs, lifting bail, front and rear jacks Trailer brakes can be offered as required Sound attenuated enclosure options Hose racks, accessory containers and other custom features available as required Wide range of suction and discharge fittings including QD Quick Disconnect fittings and accessories

SPECIFICATIONS:

Connections: 18" (450 mm) suction x 14" (356 mm) discharge ANSI Flanges Maximum Pump Speed: 1200 rpm Maximum Flow: 12500 gpm (2840 m3/h) Maximum Head: 138' (42 m) Maximum Static Priming Lift: 28' (8.5 m) Water Temperature Limit: 160 F (70 C) Solids Handling Capability: 4" (100 mm) Maximum Casing Pressure: 125 psig (862 kPa) Standard Compact Fuel Tank: 175 gallons (662 liters) Optional Large Fuel Tank: 250 gallons (946 liters)

PUMP MATERIALS:

Casing: Cast Iron (CD4MCu is an option) Impeller: Cast Iron (CD4MCu is an option) Bearing Housing: Cast Iron Bearing Lubrication: Grease Shaft: Steel Shaft Sleeve: Stainless Steel Seal: Silicon Carbide on Silicon Carbide Chassis/Fuel Cell: Steel Non-Return Valve: Nitrile Fitted Cast Iron Environmental Box (Optional): Steel

Please Contact Nutmeg Utility Products, Inc For Pricing:

Phone #203-272-2291

Fax #203 272-1830

Toll-Free #800-424-4246

Email- Info@nutmegutility.com