Trash Auto Prime 12GHTAP

Trash Auto Prime 12GHTAP
Item# 12GHTAP

Product Description

The model 12GHTAP is capable of achieving maximum flows of 8800 gpm (2000 m3/h) and maximum total head of 168' (51 m) while handling solids up to 4" (100 mm) in diameter. The standard 12GHTAP is powered by a water cooled, 6-cylinder diesel engine. Alternative drives are available, including other diesel engines or electric motor options.

FEATURES:

heavy duty pumps are engineered specifically for portable application Fully automatic priming system allows the pump to prime and re-prime while running Compressor-fed, venturi priming system provides rapid, reliable priming Fully guarded coupling Mechanical seal with biodegradable glycol quench allows the pump to start and run dry Non-return valve uses only a single moving part to allow full flow with minimal restriction Pump casings are hydrostatically tested to 50 psig (345 kPa) above the peak casing design pressure Standard engine control panel provides preset emergency shutdown protection and allows the addition of automatic level control Skid-mounted format with integral fuel tank, tie downs, lifting bail and fork pockets

OPTIONS:

Pump’s Environmental Box captures venturi blow by, separates and silences air exhaust and returns liquid to the pump suction. Fuel tanks for extended run times and/or remote location as required Highway trailer with integral fuel cell/chassis, lights, fenders, tie downs, lifting bail, front and rear jacks Trailer brakes can be offered as required Sound attenuated enclosure options Hose racks, accessory containers and other custom features available as required Wide range of suction and discharge fittings including“QD” Quick Disconnect fittings and accessories

SPECIFICATIONS:

Connections: 12" (300 mm) ANSI Flanges Maximum Pump Speed: 1200 rpm Maximum Flow: 8800 gpm (2000 m3/h) Maximum Head: 168' (51 m) Maximum Static Priming Lift: 28' (8.5 m) Water Temperature Limit: 160° F (70° C) Solids Handling Capability: 4" (100 mm) Maximum Casing Pressure: 125 psig (862 kPa) Standard Compact Fuel Tank: 175 gallons (662 liters) Optional Large Fuel Tank: 250 gallons (946 liters)

PUMP MATERIALS:

Casing: Cast Iron (CD4MCu is an option) Impeller: Cast Iron (CD4MCu is an option) Bearing Housing: Cast Iron Bearing Lubrication: Grease Shaft: Steel Shaft Sleeve: Stainless Steel Seal: Silicon Carbide on Silicon Carbide Chassis/Fuel Cell: Steel Non-Return Valve: Nitrile Fitted Cast Iron Environmental Box (Optional): Steel

Please Contact Nutmeg Utility Products, Inc For Pricing:

Phone #203-272-2291

Fax #203 272-1830

Toll-Free #800-424-4246

Email- Info@nutmegutility.com