Centrifugal Wellpoint 4GSCWP

Centrifugal Wellpoint 4GSCWP
Item# 4GCSWP

Product Description

Capable of handling both water and air, the Global Pump Rotary Wellpoint series of pumps is designed for wellpoint and underdrain dewatering applications. These positive displacement pumps have quickly become the standard in the dewatering industry.

The model 4GSCWP is capable of achieving maximum flows of 600 gpm (136 m3/h) and maximum total head of 112' (34 m), with solids handling up to 5/8" (15 mm) in diameter. The standard 4GSCWP is powered by a water-cooled, 4-cylinder diesel engine. Alternative drives are available, including other diesel engines or electric motor options.


heavy duty pumps are engineered specifically for portable application Belt-driven, vacuum pump provides high air handling and a fully automatic priming system Fully guarded coupling, pulley and belting High efficiency air separation tank separates air and water before entering the pump Condensation chamber with drain contains any condensation or water vapor from the air Oil recovery system separates and removes oil and other particulates from the discharge air Non-return valve uses only a single moving part to allow full flow with minimal restriction Pump casings are hydrostatically tested to 50 psig (345 kPa) above the peak casing design pressure Standard engine control panel provides preset emergency shutdown protection and allows the addition of automatic level control Standard skid-mounted format with integral fuel tank, tie downs, lifting bail and fork pockets


Fuel tanks for extended run times and/or remote location as required Highway trailer with integral fuel cell/chassis, lights, fenders, tie downs, lifting bail, front and rear jacks Trailer brakes can be offered as required Sound attenuated enclosure options Hose racks, accessory containers and other custom features available as required Wide range of suction and discharge fittings available including QD Quick Disconnect fittings and accessories


Connections: 4" (100 mm) ANSI Flanges Maximum Pump Speed: 1800 rpm Maximum Flow: 600 gpm (136 m3/h) Maximum Head: 112' (34 m) Maximum Static Priming Lift: 28' (8.5 m) Water Temperature Limit: 160 F (70 C) Solids Handling Capability: 5/8" (15 mm) Maximum Casing Pressure: 150 psig (1034 kPa) Standard Compact Fuel Tank: 52 gallons (196 liters)


Casing: Cast Iron Impeller: Cast Iron Bearing Housing: Cast Iron Bearing Lubrication: Grease Shaft: Steel Shaft Sleeve: Stainless Steel Seal: Carbon on Ceramic Chassis/Fuel Cell: Steel Non-Return Valve: Nitrile fitted Cast Iron Air Separation Tank: Steel Oil Recovery Tank: Steel

Please Contact Nutmeg Utility Products, Inc For Pricing:

Phone #203-272-2291

Fax #203 272-1830

Toll-Free #800-424-4246

Email- Info@nutmegutility.com